|
Routine Maintenance Recommendation
|
|
In order to facilitate the proper functioning of fitness equipment, after a little period of time it is necessary to follow simple maintenance rules concerning lubrication and control of components positioning. |
Component Periodicity Action to perform
| Clean weight stack guide rods |
|
Six-monthly |
|
|
|
Clean the sliding rods with degreasing agent. Then proceed to the lubrication. |
|
| Lubricate weight stack guide rods |
|
Weekly |
|
|
|
Lubricate the sliding rods with a cloth soaked in motor oil (DO NOT use lubricants vaseline or silicone) |
|
| Lubricate knobs snap |
|
Monthly |
|
|
|
Lubricate with grease. |
|
| Safety guards |
|
Weekly |
|
|
|
Check the correct position of the guards. Check that there are no vibrations of the same during exercises. Check the screws. |
|
| Rotating Pins |
|
Six-monthly |
|
|
|
Check positioning and attachment of the hinge pins. |
|
| Tightening bolts |
|
Weekly |
|
|
|
Check tightness of bolts and nuts. |
|
| Frame |
|
Six-monthly |
|
|
|
Check that there is structural failure due to improper use. |
|
| Stability |
|
Six-monthly |
|
|
|
Check machines stability to avoid inclinations of structures and malfunctions. To correct Stability errors adopt rubber thickness, putting them under the feet on the ground. |
|
| Tensioning cables |
|
Annual |
|
|
|
To check the tension of cables make sure the plug of the weight stack comes in all holes. Then act adjuster. |
|
|
